Звук в Linux
|
"Прошел до конца последних "Черепашек Ниндзя", убил Шредера, как положено ,теперь папа настоящий кумир для своих детей!" (с) Black Prince » Софт » Linux, Unix и другие ОС |
|
| Автор | Сообщение | |
|---|---|---|
| ortus
Рейтинг: 2,19 Скачано: 525,24 GB Отдано: 952,24 GB Релизы: 81,92 GB [15] Бонус: 115,86 GB Пол: Возраст: 32 Стаж: 12 лет Сообщений: 451
Награды: 2 (Подробнее...)
|
Установил Slackware 13 на ноут Asus Eee 1001px, после сборки ядра 2.6.35 определилось все железо, проблем не имею, за исключением отсутствия звука при подключении наушников. У этого ноута идиотский совмещенный разъем для наушников и микрофона, в винде определение программное (при подключении задается вопрос), в линуксах этот костыль не работает, естественно. В наушниках слышно слабое шипение, при этом проигрыватель работает нормально, т.е. обработка звука идет, но на выход он не попадает, судя по всему. Настраивал звук через alsaconf - alsamixer - alsactl store, в ядре ALSA собрал модулем, OSS отключил. Читал на убунтовском форуме про аналогичные проблемы, но там их решали путем переустановки пакетов pulseaudio и регулировки звука утилитами вроде pavucontrol, которые в слаке юзать невозможно. Как я понимаю, мне надо где-то в настройках изменить уровень громкости, че-нибудь подкрутить, но не представляю, что именно, никогда этим раньше не занимался. Хочется найти универсальное решение, не привязанное к гуевым утилитам одного-единственного дистрибутива.
lspci -kv 00:00.0 Host bridge: Intel Corporation Pineview DMI Bridge Subsystem: ASUSTeK Computer Inc. Device 83ac Flags: bus master, fast devsel, latency 0 Capabilities: [e0] Vendor Specific Information <?> Kernel driver in use: agpgart-intel 00:02.0 VGA compatible controller: Intel Corporation Pineview Integrated Graphics Controller (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. Device 83ac Flags: bus master, fast devsel, latency 0, IRQ 43 Memory at f7e00000 (32-bit, non-prefetchable) [size=512K] I/O ports at dc00 [size=8] Memory at d0000000 (32-bit, prefetchable) [size=256M] Memory at f7d00000 (32-bit, non-prefetchable) [size=1M] Expansion ROM at <unassigned> [disabled] Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit- Capabilities: [d0] Power Management version 2 Kernel driver in use: i915 00:02.1 Display controller: Intel Corporation Pineview Integrated Graphics Controller Subsystem: ASUSTeK Computer Inc. Device 83ac Flags: bus master, fast devsel, latency 0 Memory at f7e80000 (32-bit, non-prefetchable) [size=512K] Capabilities: [d0] Power Management version 2 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02) Subsystem: ASUSTeK Computer Inc. Device 8442 Flags: bus master, fast devsel, latency 0, IRQ 45 Memory at f7cf8000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00 Capabilities: [100] Virtual Channel <?> Capabilities: [130] Root Complex Link <?> Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: 00001000-00001fff Memory behind bridge: 3f700000-3f8fffff Prefetchable memory behind bridge: 000000003f900000-000000003fafffff Capabilities: [40] Express Root Port (Slot+), MSI 00 Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit- Capabilities: [90] Subsystem: ASUSTeK Computer Inc. Device 83ad Capabilities: [a0] Power Management version 2 Capabilities: [100] Virtual Channel <?> Capabilities: [180] Root Complex Link <?> Kernel driver in use: pcieport 00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=02, subordinate=03, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: f8000000-fbffffff Prefetchable memory behind bridge: 00000000f0000000-00000000f6ffffff Capabilities: [40] Express Root Port (Slot+), MSI 00 Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit- Capabilities: [90] Subsystem: ASUSTeK Computer Inc. Device 83ad Capabilities: [a0] Power Management version 2 Capabilities: [100] Virtual Channel <?> Capabilities: [180] Root Complex Link <?> Kernel driver in use: pcieport 00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 (rev 02) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000e000-0000efff Memory behind bridge: f7f00000-f7ffffff Prefetchable memory behind bridge: 000000003fb00000-000000003fcfffff Capabilities: [40] Express Root Port (Slot+), MSI 00 Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit- Capabilities: [90] Subsystem: ASUSTeK Computer Inc. Device 83ad Capabilities: [a0] Power Management version 2 Capabilities: [100] Virtual Channel <?> Capabilities: [180] Root Complex Link <?> Kernel driver in use: pcieport 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 02) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. Device 83ad Flags: bus master, medium devsel, latency 0, IRQ 23 I/O ports at d400 [size=32] Kernel driver in use: uhci_hcd 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 02) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. Device 83ad Flags: bus master, medium devsel, latency 0, IRQ 19 I/O ports at d480 [size=32] Kernel driver in use: uhci_hcd 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 02) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. Device 83ad Flags: bus master, medium devsel, latency 0, IRQ 18 I/O ports at d800 [size=32] Kernel driver in use: uhci_hcd 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 02) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. Device 83ad Flags: bus master, medium devsel, latency 0, IRQ 16 I/O ports at d880 [size=32] Kernel driver in use: uhci_hcd 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02) (prog-if 20 [EHCI]) Subsystem: ASUSTeK Computer Inc. Device 83ad Flags: bus master, medium devsel, latency 0, IRQ 23 Memory at f7cf7c00 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Capabilities: [58] Debug port: BAR=1 offset=00a0 Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) (prog-if 01 [Subtractive decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=05, subordinate=05, sec-latency=32 Capabilities: [50] Subsystem: ASUSTeK Computer Inc. Device 83ad 00:1f.0 ISA bridge: Intel Corporation Tigerpoint LPC Controller (rev 02) Subsystem: ASUSTeK Computer Inc. Device 83ad Flags: bus master, medium devsel, latency 0 Capabilities: [e0] Vendor Specific Information <?> 00:1f.2 SATA controller: Intel Corporation 82801GR/GH (ICH7 Family) SATA AHCI Controller (rev 02) (prog-if 01 [AHCI 1.0]) Subsystem: ASUSTeK Computer Inc. Device 83ad Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 44 I/O ports at d080 [size=8] I/O ports at d000 [size=4] I/O ports at cc00 [size=8] I/O ports at c880 [size=4] I/O ports at c800 [size=32] Memory at f7cf7800 (32-bit, non-prefetchable) [size=1K] Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit- Capabilities: [70] Power Management version 2 Capabilities: [a8] SATA HBA <?> Kernel driver in use: ahci 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02) Subsystem: ASUSTeK Computer Inc. Device 83ad Flags: medium devsel, IRQ 21 I/O ports at 0400 [size=32] Kernel modules: i2c-i801 01:00.0 Ethernet controller: Attansic Technology Corp. Atheros AR8132 / L1c Gigabit Ethernet Adapter (rev c0) Subsystem: ASUSTeK Computer Inc. Device 838a Flags: bus master, fast devsel, latency 0, IRQ 46 Memory at f7fc0000 (64-bit, non-prefetchable) [size=256K] I/O ports at ec00 [size=128] Capabilities: [40] Power Management version 3 Capabilities: [48] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [58] Express Endpoint, MSI 00 Capabilities: [6c] Vital Product Data Capabilities: [100] Advanced Error Reporting Capabilities: [180] Device Serial Number ff-02-69-b7-20-cf-30-ff Kernel driver in use: atl1c Kernel modules: atl1c 02:00.0 Network controller: Atheros Communications Inc. Device 002c (rev 01) Subsystem: Device 1a3b:1112 Flags: bus master, fast devsel, latency 0, IRQ 17 Memory at fbff0000 (64-bit, non-prefetchable) [size=64K] Capabilities: [40] Power Management version 3 Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit- Capabilities: [60] Express Legacy Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting Capabilities: [140] Virtual Channel <?> Capabilities: [160] Device Serial Number 00-15-17-ff-ff-24-14-12 Capabilities: [170] Power Budgeting <?> Kernel driver in use: ath9k Kernel modules: ath9k dmesg [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.35my-1 (root@taival) (gcc version 4.3.3 (GCC) ) #2 SMP PREEMPT Fri Aug 13 13:04:54 MSD 2010 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e2000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003f690000 (usable) [ 0.000000] BIOS-e820: 000000003f690000 - 000000003f69e000 (ACPI data) [ 0.000000] BIOS-e820: 000000003f69e000 - 000000003f6e0000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003f6e0000 - 000000003f700000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel! [ 0.000000] DMI present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0x3f690 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-DFFFF uncachable [ 0.000000] E0000-EFFFF write-through [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask 0C0000000 write-back [ 0.000000] 1 base 03F700000 mask 0FFF00000 uncachable [ 0.000000] 2 base 03F800000 mask 0FF800000 uncachable [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable) [ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e2000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000003f690000 (usable) [ 0.000000] modified: 000000003f690000 - 000000003f69e000 (ACPI data) [ 0.000000] modified: 000000003f69e000 - 000000003f6e0000 (ACPI NVS) [ 0.000000] modified: 000000003f6e0000 - 000000003f700000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] found SMP MP-table at [c00ff780] ff780 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 15000-1a000 [ 0.000000] ACPI: RSDP 000fbf40 00024 (v02 ACPIAM) [ 0.000000] ACPI: XSDT 3f690100 0006C (v01 _ASUS_ Notebook 04001030 MSFT 00000097) [ 0.000000] ACPI: FACP 3f690290 000F4 (v04 A_M_I_ OEMFACP 04001030 MSFT 00000097) [ 0.000000] ACPI: DSDT 3f690490 08BA0 (v02 A1591 A1591000 00000000 INTL 20060113) [ 0.000000] ACPI: FACS 3f69e000 00040 [ 0.000000] ACPI: APIC 3f690390 0005C (v02 A_M_I_ OEMAPIC 04001030 MSFT 00000097) [ 0.000000] ACPI: MCFG 3f6903f0 0003C (v01 A_M_I_ OEMMCFG 04001030 MSFT 00000097) [ 0.000000] ACPI: ECDT 3f690430 00055 (v01 A_M_I_ OEMECDT 04001030 MSFT 00000097) [ 0.000000] ACPI: OEMB 3f69e040 00061 (v01 A_M_I_ AMI_OEM 04001030 MSFT 00000097) [ 0.000000] ACPI: HPET 3f699030 00038 (v01 A_M_I_ OEMHPET 04001030 MSFT 00000097) [ 0.000000] ACPI: GSCI 3f69e0b0 02024 (v01 A_M_I_ GMCHSCI 04001030 MSFT 00000097) [ 0.000000] ACPI: SSDT 3f6a0c80 004F0 (v01 PmRef CpuPm 00003000 INTL 20060113) [ 0.000000] ACPI: SLIC 3f699070 00176 (v01 _ASUS_ Notebook 04001030 MSFT 00000097) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 126MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0003f690 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0003f690 [ 0.000000] On node 0 totalpages: 259615 [ 0.000000] free_area_init_node: node 0, pgdat c0804a40, node_mem_map c1001200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 254 pages used for memmap [ 0.000000] HighMem zone: 32148 pages, LIFO batch:7 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] early_res array is doubled to 64 at [16000 - 167ff] [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e2000 [ 0.000000] PM: Registered nosave memory: 00000000000e2000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 3f700000 (gap: 3f700000:bf700000) [ 0.000000] setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @c1800000 s35200 r0 d22144 u2097152 [ 0.000000] pcpu-alloc: s35200 r0 d22144 u2097152 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257585 [ 0.000000] Kernel command line: BOOT_IMAGE=35m1 ro root=801 quiet [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 5194240 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Subtract (47 early reservations) [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE [ 0.000000] #2 [0000100000 - 0000908bac] TEXT DATA BSS [ 0.000000] #3 [0000909000 - 000090c1df] BRK [ 0.000000] #4 [00000ff790 - 0000100000] BIOS reserved [ 0.000000] #5 [00000ff780 - 00000ff790] MP-table mpf [ 0.000000] #6 [000009fc00 - 00000f11b0] BIOS reserved [ 0.000000] #7 [00000f12e8 - 00000ff780] BIOS reserved [ 0.000000] #8 [00000f11b0 - 00000f12e8] MP-table mpc [ 0.000000] #9 [0000010000 - 0000011000] TRAMPOLINE [ 0.000000] #10 [0000011000 - 0000015000] ACPI WAKEUP [ 0.000000] #11 [0000015000 - 0000016000] PGTABLE [ 0.000000] #12 [0001000000 - 0001001000] BOOTMEM [ 0.000000] #13 [0001001000 - 00017f1000] BOOTMEM [ 0.000000] #14 [00017f1000 - 00017f1004] BOOTMEM [ 0.000000] #15 [00017f1040 - 00017f1100] BOOTMEM [ 0.000000] #16 [00017f1100 - 00017f1154] BOOTMEM [ 0.000000] #17 [00017f1180 - 00017f4180] BOOTMEM [ 0.000000] #18 [00017f4180 - 00017f418c] BOOTMEM [ 0.000000] #19 [00017f41c0 - 00017f47c0] BOOTMEM [ 0.000000] #20 [00017f47c0 - 00017f47e5] BOOTMEM [ 0.000000] #21 [00017f4800 - 00017f4827] BOOTMEM [ 0.000000] #22 [00017f4840 - 00017f4958] BOOTMEM [ 0.000000] #23 [00017f4980 - 00017f49c0] BOOTMEM [ 0.000000] #24 [00017f49c0 - 00017f4a00] BOOTMEM [ 0.000000] #25 [00017f4a00 - 00017f4a40] BOOTMEM [ 0.000000] #26 [00017f4a40 - 00017f4a80] BOOTMEM [ 0.000000] #27 [00017f4a80 - 00017f4ac0] BOOTMEM [ 0.000000] #28 [00017f4ac0 - 00017f4b00] BOOTMEM [ 0.000000] #29 [00017f4b00 - 00017f4b40] BOOTMEM [ 0.000000] #30 [00017f4b40 - 00017f4b80] BOOTMEM [ 0.000000] #31 [00017f4b80 - 00017f4bc0] BOOTMEM [ 0.000000] #32 [00017f4bc0 - 00017f4bd0] BOOTMEM [ 0.000000] #33 [00017f4c00 - 00017f4c22] BOOTMEM [ 0.000000] #34 [00017f4c40 - 00017f4c62] BOOTMEM [ 0.000000] #35 [0001800000 - 000180e000] BOOTMEM [ 0.000000] #36 [0001a00000 - 0001a0e000] BOOTMEM [ 0.000000] #37 [00017f6c80 - 00017f6c84] BOOTMEM [ 0.000000] #38 [00017f6cc0 - 00017f6cc4] BOOTMEM [ 0.000000] #39 [00017f6d00 - 00017f6d08] BOOTMEM [ 0.000000] #40 [00017f6d40 - 00017f6d48] BOOTMEM [ 0.000000] #41 [00017f6d80 - 00017f6e28] BOOTMEM [ 0.000000] #42 [00017f6e40 - 00017f6ea8] BOOTMEM [ 0.000000] #43 [00017f6ec0 - 00017faec0] BOOTMEM [ 0.000000] #44 [000180e000 - 000188e000] BOOTMEM [ 0.000000] #45 [000188e000 - 00018ce000] BOOTMEM [ 0.000000] #46 [0001a0e000 - 0001f02200] BOOTMEM [ 0.000000] Initializing HighMem for node 0 (000377fe:0003f690) [ 0.000000] Memory: 1016068k/1038912k available (5110k kernel code, 22392k reserved, 2107k data, 424k init, 129608k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff8f000 - 0xfffff000 ( 448 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc080d000 - 0xc0877000 ( 424 kB) [ 0.000000] .data : 0xc05fdbfa - 0xc080c828 (2107 kB) [ 0.000000] .text : 0xc0100000 - 0xc05fdbfa (5110 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU-based detection of stalled CPUs is disabled. [ 0.000000] Verbose stalled-CPUs detection is disabled. [ 0.000000] NR_IRQS:2304 nr_irqs:512 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1666.703 MHz processor. [ 0.001008] Calibrating delay loop (skipped), value calculated using timer frequency.. 3333.40 BogoMIPS (lpj=1666703) [ 0.001018] pid_max: default: 32768 minimum: 301 [ 0.001054] Security Framework initialized [ 0.001065] Smack: Initializing. [ 0.001083] Mount-cache hash table entries: 512 [ 0.001313] Initializing cgroup subsys ns [ 0.001322] Initializing cgroup subsys cpuacct [ 0.001331] Initializing cgroup subsys memory [ 0.001345] Initializing cgroup subsys devices [ 0.001350] Initializing cgroup subsys freezer [ 0.001355] Initializing cgroup subsys net_cls [ 0.001390] CPU: Physical Processor ID: 0 [ 0.001394] CPU: Processor Core ID: 0 [ 0.001399] mce: CPU supports 5 MCE banks [ 0.001410] CPU0: Thermal monitoring enabled (TM2) [ 0.001417] using mwait in idle threads. [ 0.001428] Performance Events: PEBS fmt0+, Atom events, Intel PMU driver. [ 0.001444] ... version: 3 [ 0.001448] ... bit width: 40 [ 0.001452] ... generic registers: 2 [ 0.001456] ... value mask: 000000ffffffffff [ 0.001461] ... max period: 000000007fffffff [ 0.001465] ... fixed-purpose events: 3 [ 0.001469] ... event mask: 0000000700000003 [ 0.002698] ACPI: Core revision 20100428 [ 0.019101] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.019469] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.029505] CPU0: Intel(R) Atom(TM) CPU N450 @ 1.66GHz stepping 0a [ 0.034048] Booting Node 0, Processors #1 Ok. [ 0.001999] Initializing CPU#1 [ 0.106032] Brought up 2 CPUs [ 0.106041] Total of 2 processors activated (6666.23 BogoMIPS). [ 0.108313] Time: 8:16:32 Date: 08/19/10 [ 0.108313] NET: Registered protocol family 16 [ 0.109053] ACPI: bus type pci registered [ 0.109173] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.109181] PCI: not using MMCONFIG [ 0.109576] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5 [ 0.109581] PCI: Using configuration type 1 for base access [ 0.112046] bio: create slab <bio-0> at 0 [ 0.118242] ACPI: EC: EC description table is found, configuring boot EC [ 0.122823] ACPI: Executed 1 blocks of module-level executable AML code [ 0.133868] ACPI: SSDT 3f6a0190 00326 (v01 PmRef Cpu0Ist 00003000 INTL 20060113) [ 0.135129] ACPI: Dynamic OEM Table Load: [ 0.135138] ACPI: SSDT (null) 00326 (v01 PmRef Cpu0Ist 00003000 INTL 20060113) [ 0.135713] ACPI: SSDT 3f6a0550 00724 (v01 PmRef Cpu0Cst 00003001 INTL 20060113) [ 0.136853] ACPI: Dynamic OEM Table Load: [ 0.136861] ACPI: SSDT (null) 00724 (v01 PmRef Cpu0Cst 00003001 INTL 20060113) [ 0.137658] ACPI: SSDT 3f6a00e0 000AB (v01 PmRef Cpu1Ist 00003000 INTL 20060113) [ 0.138822] ACPI: Dynamic OEM Table Load: [ 0.138830] ACPI: SSDT (null) 000AB (v01 PmRef Cpu1Ist 00003000 INTL 20060113) [ 0.139123] ACPI: SSDT 3f6a04c0 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20060113) [ 0.140268] ACPI: Dynamic OEM Table Load: [ 0.140276] ACPI: SSDT (null) 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20060113) [ 0.140460] ACPI: Interpreter enabled [ 0.140468] ACPI: (supports S0 S3 S4 S5) [ 0.140519] ACPI: Using IOAPIC for interrupt routing [ 0.140633] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.142431] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.142438] PCI: Using MMCONFIG for extended config space [ 0.155125] ACPI: BIOS _OSI(Linux) query ignored [ 0.158752] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62 [ 0.158905] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.159176] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.159675] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] [ 0.159684] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] [ 0.159692] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.159699] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff] [ 0.159706] pci_root PNP0A08:00: host bridge window [mem 0x3f700000-0xfed8ffff] [ 0.159787] pci 0000:00:02.0: reg 10: [mem 0xf7e00000-0xf7e7ffff] [ 0.159797] pci 0000:00:02.0: reg 14: [io 0xdc00-0xdc07] [ 0.159806] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff pref] [ 0.159815] pci 0000:00:02.0: reg 1c: [mem 0xf7d00000-0xf7dfffff] [ 0.159862] pci 0000:00:02.1: reg 10: [mem 0xf7e80000-0xf7efffff] [ 0.159974] pci 0000:00:1b.0: reg 10: [mem 0xf7cf8000-0xf7cfbfff 64bit] [ 0.160045] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.160054] pci 0000:00:1b.0: PME# disabled [ 0.160149] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.160157] pci 0000:00:1c.0: PME# disabled [ 0.160254] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.160262] pci 0000:00:1c.1: PME# disabled [ 0.160359] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.160367] pci 0000:00:1c.3: PME# disabled [ 0.160432] pci 0000:00:1d.0: reg 20: [io 0xd400-0xd41f] [ 0.160502] pci 0000:00:1d.1: reg 20: [io 0xd480-0xd49f] [ 0.160571] pci 0000:00:1d.2: reg 20: [io 0xd800-0xd81f] [ 0.160641] pci 0000:00:1d.3: reg 20: [io 0xd880-0xd89f] [ 0.160714] pci 0000:00:1d.7: reg 10: [mem 0xf7cf7c00-0xf7cf7fff] [ 0.160783] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.160792] pci 0000:00:1d.7: PME# disabled [ 0.161022] pci 0000:00:1f.2: reg 10: [io 0xd080-0xd087] [ 0.161034] pci 0000:00:1f.2: reg 14: [io 0xd000-0xd003] [ 0.161045] pci 0000:00:1f.2: reg 18: [io 0xcc00-0xcc07] [ 0.161056] pci 0000:00:1f.2: reg 1c: [io 0xc880-0xc883] [ 0.161066] pci 0000:00:1f.2: reg 20: [io 0xc800-0xc81f] [ 0.161078] pci 0000:00:1f.2: reg 24: [mem 0xf7cf7800-0xf7cf7bff] [ 0.161121] pci 0000:00:1f.2: PME# supported from D3hot [ 0.161129] pci 0000:00:1f.2: PME# disabled [ 0.161195] pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f] [ 0.161287] pci 0000:00:1c.0: PCI bridge to [bus 04-04] [ 0.161296] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled) [ 0.161305] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 0.161317] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.161424] pci 0000:02:00.0: reg 10: [mem 0xfbff0000-0xfbffffff 64bit] [ 0.161507] pci 0000:02:00.0: supports D1 [ 0.161512] pci 0000:02:00.0: PME# supported from D0 D1 D3hot [ 0.161521] pci 0000:02:00.0: PME# disabled [ 0.163031] pci 0000:00:1c.1: PCI bridge to [bus 02-03] [ 0.163040] pci 0000:00:1c.1: bridge window [io 0xf000-0x0000] (disabled) [ 0.163050] pci 0000:00:1c.1: bridge window [mem 0xf8000000-0xfbffffff] [ 0.163062] pci 0000:00:1c.1: bridge window [mem 0xf0000000-0xf6ffffff 64bit pref] [ 0.163170] pci 0000:01:00.0: reg 10: [mem 0xf7fc0000-0xf7ffffff 64bit] [ 0.163184] pci 0000:01:00.0: reg 18: [io 0xec00-0xec7f] [ 0.163265] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.163275] pci 0000:01:00.0: PME# disabled [ 0.165026] pci 0000:00:1c.3: PCI bridge to [bus 01-01] [ 0.165036] pci 0000:00:1c.3: bridge window [io 0xe000-0xefff] [ 0.165045] pci 0000:00:1c.3: bridge window [mem 0xf7f00000-0xf7ffffff] [ 0.165056] pci 0000:00:1c.3: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.165145] pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode) [ 0.165153] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled) [ 0.165162] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 0.165174] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.165181] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.165188] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.165194] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.165201] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode) [ 0.165208] pci 0000:00:1e.0: bridge window [mem 0x3f700000-0xfed8ffff] (subtractive decode) [ 0.165237] pci_bus 0000:00: on NUMA node 0 [ 0.165250] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.165583] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] [ 0.165723] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT] [ 0.165840] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT] [ 0.190885] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 12 14 *15) [ 0.191174] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.191441] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 12 14 15) [ 0.191706] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.191977] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.192257] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.192522] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 7 10 11 12 14 15) [ 0.192788] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 0.193034] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.193058] vgaarb: loaded [ 0.193251] SCSI subsystem initialized [ 0.193280] libata version 3.00 loaded. [ 0.193280] usbcore: registered new interface driver usbfs [ 0.193280] usbcore: registered new interface driver hub [ 0.193280] usbcore: registered new device driver usb [ 0.194112] ACPI: WMI: Mapper loaded [ 0.194117] PCI: Using ACPI for IRQ routing [ 0.194172] PCI: pci_cache_line_size set to 64 bytes [ 0.194287] reserve RAM buffer: 000000000009fc00 - 000000000009ffff [ 0.194294] reserve RAM buffer: 000000003f690000 - 000000003fffffff [ 0.194591] cfg80211: Calling CRDA to update world regulatory domain [ 0.194638] NetLabel: Initializing [ 0.194638] NetLabel: domain hash size = 128 [ 0.194638] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.194638] NetLabel: unlabeled traffic allowed by default [ 0.194638] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.194638] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.194638] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.197037] Switching to clocksource tsc [ 0.200244] pnp: PnP ACPI init [ 0.200278] ACPI: bus type pnp registered [ 0.204713] pnp: PnP ACPI: found 13 devices [ 0.204720] ACPI: ACPI bus type pnp unregistered [ 0.204747] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved [ 0.204755] system 00:01: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.204773] system 00:08: [io 0x025c-0x025f] has been reserved [ 0.204781] system 00:08: [io 0x0380-0x0383] has been reserved [ 0.204788] system 00:08: [io 0x0400-0x041f] has been reserved [ 0.204795] system 00:08: [io 0x04d0-0x04d1] has been reserved [ 0.204801] system 00:08: [io 0x0800-0x087f] has been reserved [ 0.204809] system 00:08: [io 0x0480-0x04bf] has been reserved [ 0.204816] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.204824] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.204831] system 00:08: [mem 0xfed50000-0xfed8ffff] has been reserved [ 0.204840] system 00:08: [mem 0xffb00000-0xffbfffff] has been reserved [ 0.204850] system 00:08: [mem 0xfff00000-0xffffffff] could not be reserved [ 0.204865] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.204873] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.204885] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved [ 0.204898] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.204906] system 00:0c: [mem 0x000c0000-0x000cffff] could not be reserved [ 0.204913] system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.204921] system 00:0c: [mem 0x00100000-0x3f6fffff] could not be reserved [ 0.204936] system 00:0c: [mem 0xfed90000-0xffffffff] could not be reserved [ 0.240467] pci 0000:00:1c.0: BAR 8: assigned [mem 0x3f700000-0x3f8fffff] [ 0.240478] pci 0000:00:1c.0: BAR 9: assigned [mem 0x3f900000-0x3fafffff 64bit pref] [ 0.240487] pci 0000:00:1c.3: BAR 9: assigned [mem 0x3fb00000-0x3fcfffff 64bit pref] [ 0.240496] pci 0000:00:1c.0: BAR 7: assigned [io 0x1000-0x1fff] [ 0.240503] pci 0000:00:1c.1: BAR 7: assigned [io 0x2000-0x2fff] [ 0.240510] pci 0000:00:1c.0: PCI bridge to [bus 04-04] [ 0.240517] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] [ 0.240527] pci 0000:00:1c.0: bridge window [mem 0x3f700000-0x3f8fffff] [ 0.240536] pci 0000:00:1c.0: bridge window [mem 0x3f900000-0x3fafffff 64bit pref] [ 0.240548] pci 0000:00:1c.1: PCI bridge to [bus 02-03] [ 0.240555] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff] [ 0.240564] pci 0000:00:1c.1: bridge window [mem 0xf8000000-0xfbffffff] [ 0.240573] pci 0000:00:1c.1: bridge window [mem 0xf0000000-0xf6ffffff 64bit pref] [ 0.240585] pci 0000:00:1c.3: PCI bridge to [bus 01-01] [ 0.240592] pci 0000:00:1c.3: bridge window [io 0xe000-0xefff] [ 0.240601] pci 0000:00:1c.3: bridge window [mem 0xf7f00000-0xf7ffffff] [ 0.240610] pci 0000:00:1c.3: bridge window [mem 0x3fb00000-0x3fcfffff 64bit pref] [ 0.240622] pci 0000:00:1e.0: PCI bridge to [bus 05-05] [ 0.240627] pci 0000:00:1e.0: bridge window [io disabled] [ 0.240635] pci 0000:00:1e.0: bridge window [mem disabled] [ 0.240642] pci 0000:00:1e.0: bridge window [mem pref disabled] [ 0.240665] pci 0000:00:1c.0: enabling device (0104 -> 0107) [ 0.240677] alloc irq_desc for 16 on node -1 [ 0.240682] alloc kstat_irqs on node -1 [ 0.240695] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.240705] pci 0000:00:1c.0: setting latency timer to 64 [ 0.240719] pci 0000:00:1c.1: enabling device (0106 -> 0107) [ 0.240727] alloc irq_desc for 17 on node -1 [ 0.240732] alloc kstat_irqs on node -1 [ 0.240741] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.240750] pci 0000:00:1c.1: setting latency timer to 64 [ 0.240765] alloc irq_desc for 19 on node -1 [ 0.240770] alloc kstat_irqs on node -1 [ 0.240778] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 0.240787] pci 0000:00:1c.3: setting latency timer to 64 [ 0.240800] pci 0000:00:1e.0: setting latency timer to 64 [ 0.240808] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.240814] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.240821] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.240827] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff] [ 0.240843] pci_bus 0000:00: resource 8 [mem 0x3f700000-0xfed8ffff] [ 0.240850] pci_bus 0000:04: resource 0 [io 0x1000-0x1fff] [ 0.240856] pci_bus 0000:04: resource 1 [mem 0x3f700000-0x3f8fffff] [ 0.240862] pci_bus 0000:04: resource 2 [mem 0x3f900000-0x3fafffff 64bit pref] [ 0.240869] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] [ 0.240875] pci_bus 0000:02: resource 1 [mem 0xf8000000-0xfbffffff] [ 0.240882] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf6ffffff 64bit pref] [ 0.240888] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 0.240894] pci_bus 0000:01: resource 1 [mem 0xf7f00000-0xf7ffffff] [ 0.240901] pci_bus 0000:01: resource 2 [mem 0x3fb00000-0x3fcfffff 64bit pref] [ 0.240908] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7] [ 0.240913] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff] [ 0.240921] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff] [ 0.240929] pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000dffff] [ 0.240935] pci_bus 0000:05: resource 8 [mem 0x3f700000-0xfed8ffff] [ 0.241004] NET: Registered protocol family 2 [ 0.241140] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.241631] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.242507] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.242956] TCP: Hash tables configured (established 131072 bind 65536) [ 0.242962] TCP reno registered [ 0.242974] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.242993] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.243201] NET: Registered protocol family 1 [ 0.243240] pci 0000:00:02.0: Boot video device [ 0.243403] PCI: CLS 32 bytes, default 64 [ 0.243785] Machine check injector initialized [ 0.244026] Scanning for low memory corruption every 60 seconds [ 0.244237] audit: initializing netlink socket (disabled) [ 0.244260] type=2000 audit(1282205792.242:1): initialized [ 0.267008] highmem bounce pool size: 64 pages [ 0.267020] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.270853] VFS: Disk quotas dquot_6.5.2 [ 0.271008] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.271314] DLM (built Aug 13 2010 12:25:18) installed [ 0.272083] fuse init (API version 7.14) [ 0.272376] msgmni has been set to 1731 [ 0.273557] alg: No test for stdrng (krng) [ 0.273699] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.273707] io scheduler noop registered [ 0.273711] io scheduler deadline registered [ 0.273748] io scheduler cfq registered (default) [ 0.273918] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.273971] alloc irq_desc for 40 on node -1 [ 0.273976] alloc kstat_irqs on node -1 [ 0.273994] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X [ 0.274150] pcieport 0000:00:1c.1: setting latency timer to 64 [ 0.274196] alloc irq_desc for 41 on node -1 [ 0.274201] alloc kstat_irqs on node -1 [ 0.274215] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X [ 0.274352] pcieport 0000:00:1c.3: setting latency timer to 64 [ 0.274398] alloc irq_desc for 42 on node -1 [ 0.274403] alloc kstat_irqs on node -1 [ 0.274416] pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X [ 0.274666] pci-stub: invalid id string "" [ 0.274929] uvesafb: failed to execute /sbin/v86d [ 0.274982] uvesafb: make sure that the v86d helper is installed and executable [ 0.275042] uvesafb: Getting VBE info block failed (eax=0x4f00, err=-2) [ 0.275097] uvesafb: vbe_init() failed with -22 [ 0.275149] uvesafb: probe of uvesafb.0 failed with error -22 [ 0.275507] ACPI: AC Adapter [AC0] (on-line) [ 0.275693] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 0.280338] ACPI: Lid Switch [LID] [ 0.280447] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 0.280454] ACPI: Sleep Button [SLPB] [ 0.280553] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 [ 0.280560] ACPI: Power Button [PWRB] [ 0.280661] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 0.280667] ACPI: Power Button [PWRF] [ 0.281191] ACPI: acpi_idle registered with cpuidle [ 0.281790] Monitor-Mwait will be used to enter C-1 state [ 0.282930] Monitor-Mwait will be used to enter C-2 state [ 0.282946] Marking TSC unstable due to TSC halts in idle [ 0.283737] Switching to clocksource hpet [ 0.300521] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.300541] ACPI: Thermal Zone [TZ00] (39 C) [ 0.303761] Non-volatile memory driver v1.3 [ 0.303768] Linux agpgart interface v0.103 [ 0.303875] agpgart-intel 0000:00:00.0: Intel GMA3150 Chipset [ 0.304515] agpgart-intel 0000:00:00.0: detected 8188K stolen memory [ 0.317806] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 0.317909] [drm] Initialized drm 1.1.0 20060810 [ 0.317950] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.317959] i915 0000:00:02.0: setting latency timer to 64 [ 0.362689] alloc irq_desc for 43 on node -1 [ 0.362698] alloc kstat_irqs on node -1 [ 0.362715] i915 0000:00:02.0: irq 43 for MSI/MSI-X [ 0.362734] [drm] set up 7M of stolen space [ 0.391572] ACPI: Battery Slot [BAT0] (battery present) [ 0.471057] composite sync not supported [ 0.471183] [drm] initialized overlay support [ 0.884281] composite sync not supported [ 1.176546] Console: switching to colour frame buffer device 128x37 [ 1.184356] fb0: inteldrmfb frame buffer device [ 1.184360] drm: registered panic notifier [ 1.184366] Slow work thread pool: Starting up [ 1.184485] Slow work thread pool: Ready [ 1.192192] ACPI Warning: _BQC returned an invalid level (20100428/video-640) [ 1.197492] acpi device:2b: registered as cooling_device2 [ 1.197752] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4 [ 1.197766] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 1.197802] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 1.200110] brd: module loaded [ 1.201256] loop: module loaded [ 1.201409] ahci 0000:00:1f.2: version 3.0 [ 1.201437] alloc irq_desc for 21 on node -1 [ 1.201442] alloc kstat_irqs on node -1 [ 1.201457] ahci 0000:00:1f.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 1.201515] alloc irq_desc for 44 on node -1 [ 1.201520] alloc kstat_irqs on node -1 [ 1.201536] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X [ 1.201627] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x1 impl SATA mode [ 1.201636] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part [ 1.201646] ahci 0000:00:1f.2: setting latency timer to 64 [ 1.201874] scsi0 : ahci [ 1.202114] scsi1 : ahci [ 1.202270] scsi2 : ahci [ 1.202412] scsi3 : ahci [ 1.202908] ata1: SATA max UDMA/133 abar m1024@0xf7cf7800 port 0xf7cf7900 irq 44 [ 1.202915] ata2: DUMMY [ 1.202919] ata3: DUMMY [ 1.202923] ata4: DUMMY [ 1.203116] console [netcon0] enabled [ 1.203123] netconsole: network logging started [ 1.203277] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.203325] alloc irq_desc for 23 on node -1 [ 1.203331] alloc kstat_irqs on node -1 [ 1.203345] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 1.203381] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 1.203388] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 1.203494] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 1.203536] ehci_hcd 0000:00:1d.7: using broken periodic workaround [ 1.203554] ehci_hcd 0000:00:1d.7: debug port 1 [ 1.207445] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 1.207481] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf7cf7c00 [ 1.217032] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.217243] hub 1-0:1.0: USB hub found [ 1.217255] hub 1-0:1.0: 8 ports detected [ 1.217442] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.217476] uhci_hcd: USB Universal Host Controller Interface driver [ 1.217541] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 1.217554] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.217561] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.217645] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.217681] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d400 [ 1.217897] hub 2-0:1.0: USB hub found [ 1.217908] hub 2-0:1.0: 2 ports detected [ 1.218094] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.218107] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 1.218115] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.218188] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 1.218244] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d480 [ 1.218469] hub 3-0:1.0: USB hub found [ 1.218480] hub 3-0:1.0: 2 ports detected [ 1.218631] alloc irq_desc for 18 on node -1 [ 1.218637] alloc kstat_irqs on node -1 [ 1.218649] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.218661] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 1.218668] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.218747] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 1.218797] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d800 [ 1.219046] hub 4-0:1.0: USB hub found [ 1.219057] hub 4-0:1.0: 2 ports detected [ 1.219205] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 [ 1.219218] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 1.219225] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 1.219303] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 1.219353] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d880 [ 1.219576] hub 5-0:1.0: USB hub found [ 1.219587] hub 5-0:1.0: 2 ports detected [ 1.219791] usbcore: registered new interface driver usbtmc [ 1.219797] Initializing USB Mass Storage driver... [ 1.219873] usbcore: registered new interface driver usb-storage [ 1.219877] USB Mass Storage support registered. [ 1.219951] usbcore: registered new interface driver libusual [ 1.220083] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.238695] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.238714] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.238851] mice: PS/2 mouse device common for all mice [ 1.239155] rtc_cmos 00:03: RTC can wake from S4 [ 1.239247] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 1.239289] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.240213] cpuidle: using governor ladder [ 1.240443] cpuidle: using governor menu [ 1.240906] usbcore: registered new interface driver hiddev [ 1.240945] usbcore: registered new interface driver usbhid [ 1.240950] usbhid: USB HID core driver [ 1.241098] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input5 [ 1.241159] eeepc_wmi: Backlight controlled by ACPI video driver [ 1.241307] oprofile: using NMI interrupt. [ 1.242082] TCP cubic registered [ 1.242465] NET: Registered protocol family 10 [ 1.243314] lo: Disabled Privacy Extensions [ 1.243847] NET: Registered protocol family 17 [ 1.244890] SCTP: Hash tables configured (established 65536 bind 65536) [ 1.245408] lib80211: common routines for IEEE802.11 drivers [ 1.245416] lib80211_crypt: registered algorithm 'NULL' [ 1.245460] Using IPI No-Shortcut mode [ 1.245628] PM: Resume from disk failed. [ 1.245655] registered taskstats version 1 [ 1.246091] Magic number: 6:7:271 [ 1.246223] rtc_cmos 00:03: setting system clock to 2010-08-19 08:16:34 UTC (1282205794) [ 1.246231] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.246235] EDD information not available. [ 1.256535] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input6 [ 1.508079] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.509999] ata1.00: unexpected _GTF length (  [ 1.510355] ata1.00: ATA-8: ST9160314AS, 0002SDM1, max UDMA/133 [ 1.510372] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 1.512649] ata1.00: unexpected _GTF length ( [ 1.513088] ata1.00: configured for UDMA/133 [ 1.519076] usb 1-6: new high speed USB device using ehci_hcd and address 2 [ 1.524362] scsi 0:0:0:0: Direct-Access ATA ST9160314AS 0002 PQ: 0 ANSI: 5 [ 1.524698] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.524760] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 1.524999] sd 0:0:0:0: [sda] Write Protect is off [ 1.525031] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.525105] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.525592] sda: sda1 sda2 sda3 [ 1.561743] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.601605] REISERFS (device sda1): found reiserfs format "3.6" with standard journal [ 1.601641] REISERFS (device sda1): using ordered data mode [ 1.605747] REISERFS (device sda1): journal params: device sda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 1.606434] REISERFS (device sda1): checking transaction log (sda1) [ 1.686968] REISERFS (device sda1): Using r5 hash to sort names [ 1.687070] VFS: Mounted root (reiserfs filesystem) readonly on device 8:1. [ 1.687126] Freeing unused kernel memory: 424k freed [ 1.687633] Write protecting the kernel text: 5112k [ 1.687736] Write protecting the kernel read-only data: 1816k [ 3.483968] atl1c 0000:01:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 3.483996] atl1c 0000:01:00.0: setting latency timer to 64 [ 3.558455] atl1c 0000:01:00.0: version 1.0.0.2-NAPI [ 3.664093] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 3.664113] ACPI: resource 0000:00:1f.3 [io 0x0400-0x041f] conflicts with ACPI region SMRG [??? 0x00000400-0x0000040f flags 0x47] [ 3.664122] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 4.534256] Linux video capture interface: v2.00 [ 4.658449] uvcvideo: Found UVC 1.00 device USB2.0 UVC VGA WebCam (13d3:5119) [ 4.669688] input: USB2.0 UVC VGA WebCam as /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/input/input7 [ 4.669844] usbcore: registered new interface driver uvcvideo [ 4.669852] USB Video Class driver (v0.1.0) [ 5.074034] ath9k 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 5.074057] ath9k 0000:02:00.0: setting latency timer to 64 [ 5.124841] ath: EEPROM regdomain: 0x60 [ 5.124850] ath: EEPROM indicates we should expect a direct regpair map [ 5.124861] ath: Country alpha2 being used: 00 [ 5.124866] ath: Regpair used: 0x60 [ 5.133550] phy0: Selected rate control algorithm 'ath9k_rate_control' [ 5.136004] Registered led device: ath9k-phy0::radio [ 5.136068] Registered led device: ath9k-phy0::assoc [ 5.136129] Registered led device: ath9k-phy0::tx [ 5.136192] Registered led device: ath9k-phy0::rx [ 5.136204] phy0: Atheros AR9285 Rev:2 mem=0xf9520000, irq=17 [ 5.233135] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1a0b1, caps: 0xd04731/0xa40000/0xa0000 [ 5.244616] alloc irq_desc for 22 on node -1 [ 5.244626] alloc kstat_irqs on node -1 [ 5.244647] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 5.244746] alloc irq_desc for 45 on node -1 [ 5.244753] alloc kstat_irqs on node -1 [ 5.244777] HDA Intel 0000:00:1b.0: irq 45 for MSI/MSI-X [ 5.244848] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 5.302815] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8 [ 5.319517] hda_codec: ALC269: BIOS auto-probing. [ 29.635039] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 31.597040] composite sync not supported [ 31.767786] composite sync not supported [ 35.273200] alloc irq_desc for 46 on node -1 [ 35.273208] alloc kstat_irqs on node -1 [ 35.273233] atl1c 0000:01:00.0: irq 46 for MSI/MSI-X [ 35.273905] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 174.986468] PM: Syncing filesystems ... done. [ 175.014387] PM: Preparing system for mem sleep [ 175.095207] Freezing user space processes ... (elapsed 0.01 seconds) done. [ 175.106125] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [ 175.117084] PM: Entering mem sleep [ 175.117158] Suspending console(s) (use no_console_suspend to debug) [ 175.133155] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 175.133899] sd 0:0:0:0: [sda] Stopping disk [ 175.209453] ath9k 0000:02:00.0: PCI INT A disabled [ 175.209551] pci 0000:00:1f.3: PCI INT B disabled [ 175.209725] uhci_hcd 0000:00:1d.3: PCI INT D disabled [ 175.209758] uhci_hcd 0000:00:1d.2: PCI INT C disabled [ 175.209785] uhci_hcd 0000:00:1d.1: PCI INT B disabled [ 175.209810] uhci_hcd 0000:00:1d.0: PCI INT A disabled [ 175.220072] ehci_hcd 0000:00:1d.7: PCI INT A disabled [ 175.222686] ACPI handle has no context! [ 175.222703] atl1c 0000:01:00.0: PCI INT A disabled [ 175.222715] ACPI handle has no context! [ 175.311117] HDA Intel 0000:00:1b.0: PCI INT A disabled [ 175.311168] ACPI handle has no context! [ 175.529064] PM: suspend of devices complete after 411.782 msecs [ 175.529074] PM: suspend devices took 0.412 seconds [ 175.540221] PM: late suspend of devices complete after 11.136 msecs [ 175.540278] ACPI: Preparing to enter system sleep state S3 [ 175.555584] PM: Saving platform NVS memory [ 175.563043] Disabling non-boot CPUs ... [ 175.576336] CPU 1 is now offline [ 175.576343] SMP alternatives: switching to UP code [ 175.580987] Extended CMOS year: 2000 [ 175.580987] Back to C! [ 175.580987] PM: Restoring platform NVS memory [ 175.580987] Extended CMOS year: 2000 [ 175.581045] Enabling non-boot CPUs ... [ 175.583366] SMP alternatives: switching to SMP code [ 175.587115] Booting Node 0 Processor 1 APIC 0x1 [ 175.580175] Initializing CPU#1 [ 175.663295] CPU1 is up [ 175.663760] ACPI: Waking up from system sleep state S3 [ 175.707524] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407) [ 175.707615] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002) [ 175.707666] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x1fff1, writing 0x3fa13f91) [ 175.707679] pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0xfff0, writing 0x3f803f70) [ 175.707691] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0xf0, writing 0x1010) [ 175.707710] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100104, writing 0x100507) [ 175.707780] pcieport 0000:00:1c.1: restoring config space at offset 0x7 (was 0xf0, writing 0x2020) [ 175.707800] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100106, writing 0x100507) [ 175.707866] pcieport 0000:00:1c.3: restoring config space at offset 0x9 (was 0x1fff1, writing 0x3fc13fb1) [ 175.707889] pcieport 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [ 175.707960] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [ 175.708026] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [ 175.708073] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [ 175.708118] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [ 175.708173] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002) [ 175.708324] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407) [ 175.708435] ath9k 0000:02:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10a) [ 175.708468] ath9k 0000:02:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xfbff0004) [ 175.708481] ath9k 0000:02:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x8) [ 175.708496] ath9k 0000:02:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [ 175.708660] PM: early resume of devices complete after 1.211 msecs [ 175.709660] i915 0000:00:02.0: setting latency timer to 64 [ 175.710602] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 175.710615] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 175.710672] HDA Intel 0000:00:1b.0: irq 45 for MSI/MSI-X [ 175.710750] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 175.710762] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 175.710791] usb usb2: root hub lost power or was reset [ 175.710822] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 175.710833] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 175.710859] usb usb3: root hub lost power or was reset [ 175.710888] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 175.710900] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 175.710926] usb usb4: root hub lost power or was reset [ 175.710954] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 [ 175.710966] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 175.710992] usb usb5: root hub lost power or was reset [ 175.711046] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 175.711058] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 175.711144] pci 0000:00:1e.0: setting latency timer to 64 [ 175.711168] ahci 0000:00:1f.2: setting latency timer to 64 [ 175.711251] pci 0000:00:1f.3: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 175.711271] ath9k 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 175.711965] sd 0:0:0:0: [sda] Starting disk [ 175.774536] atl1c 0000:01:00.0: irq 46 for MSI/MSI-X [ 175.935084] usb 1-6: reset high speed USB device using ehci_hcd and address 2 [ 177.395086] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 177.397035] ata1.00: unexpected _GTF length ( [ 177.399703] ata1.00: unexpected _GTF length ( [ 177.400136] ata1.00: configured for UDMA/133 [ 177.477101] PM: resume of devices complete after 1768.350 msecs [ 177.477284] PM: resume devices took 1.769 seconds [ 177.477339] PM: Finishing wakeup. [ 177.477343] Restarting tasks ... done. [ 177.505107] video LNXVIDEO:00: Restoring backlight state |
|
![[Профиль]](templates/default/images/buttons/icon_profile.gif){kind=icon} ![[ЛС]](templates/default/images/buttons/icon_pm.gif){kind=icon} |
||
![[Цитировать]](templates/default/images/buttons/icon_quote.gif){kind=icon}
|
Страница 1 из 1 |
|
|
"Прошел до конца последних "Черепашек Ниндзя", убил Шредера, как положено ,теперь папа настоящий кумир для своих детей!" (с) Black Prince » Софт » Linux, Unix и другие ОС |
Текущее время: 24-Янв 02:55
Вы не можете начинать темы
Вы не можете отвечать на сообщения Вы не можете редактировать свои сообщения Вы не можете удалять свои сообщения Вы не можете голосовать в опросах Вы не можете прикреплять файлы к сообщениям Вы не можете скачивать файлы |